-
Lotus Europa S1: Fabricating a new front T-section
Because I decided that I didn't want to buy a new chassis or any chassis sections to repair my original (but very rusty chassis), I had to fabricate a new front T-section out of a 1.6mm steel sheet.
-
Lotus Europa S1: Adjustable lower links
In this post I'll show you how to make your own adjustable lower links for the rear suspension on any Europa using rod end bearings.
-
Lotus Europa S1: Repairing the chassis backbone
it's been a while since the last update, but I have been working harder than I have been updating the blog. So bear with me, this is going to be a long blog entry.
