-
Lotus Europa S1: Finishing off the chassis
The last big job on the chassis was welding the T-section back onto the backbone. This is how I did it.
-
Lotus Europa S1: Fabricating a new front T-section
Because I decided that I didn't want to buy a new chassis or any chassis sections to repair my original (but very rusty chassis), I had to fabricate a new front T-section out of a 1.6mm steel sheet.
-
Lotus Europa S1: Adjustable lower links
In this post I'll show you how to make your own adjustable lower links for the rear suspension on any Europa using rod end bearings.
